Christmas Set Silicon Soap Mold
- Makes 4 x 80g Oval Soap
- Made of Silicone for Easy Unmolding
Melt & Pour Soap. Cold & Hot Process Soap.
Points of Interest:
Makes 6 x 80g Oval Soap
Dimensions of each soap bar: 7.8*5.4*2.2
Maximum Product Pour Temp: 230°C
Direction for Use:
When making CP or HP Soap
Tips for Cold or Hot Process Soap: Make sure your soap has hardened enough before trying to remove. For ease removal, you can put your soap in fridge or freezer for about 30 minutes. Afterwards, take it out, let it sit for about 10 min at room temperature, and then attempt to remove. You can also try adding Sodium Lactate to your recipe (1 tsp per 500 grams of oils).
When making MP Soap
Melt soap bases and pour at a temperature no hotter than 220 – 230 °C. Cool until soap has returned to room temperature. For easier and faster unmolding, place into freezer for 30 minutes. Take it out and then attempt to remove.
Once mold is used for making soap, it should not be used for food production. To avoid damage to mold, do not use sharp metal tools to cut or remove contents. Never place near an open flame, use under a broiler, or on a cook top burner.