Silicone Loaf Soap Mold (1 Kg)

Silicone Loaf Soap Mold (1 Kg)

• Makes 1 kg Brick Soap Bar
• Made of Silicone for Easy Unmolding
• Reinforced Sidewalls Prevents Bowing
• For Straight & Perfect Soap Bar
• No Rounded Corners

Common Uses:
Melt & Pour Soap. Cold & Hot Process Soap.

Points of Interest:

Makes 1 x 1000 grams Soap Loaf

Soap Bar Dimensions: (L) 20.3 cm x (B) 8.8 cm x (H) 6.3cm

Maximum Product Pour Temp: 500ºF / 260 °C

Direction for Use:

When making CP or HP Soap: Tips for Cold or Hot Process Soap: Make sure your soap has hardened enough before trying to remove. For ease removal, you can put your soap in fridge or freezer for about 30 minutes. Afterwards, take it out, let it sit for about 10 min at room temperature, and then attempt to remove. You can also try adding Sodium Lactate to your recipe (1 tsp per 500 grams of oils).

When making MP Soap: Melt soap bases and pour at a temperature no hotter than 500 º F (260 °C). Cool until soap has returned to room temperature. For easier and faster unmolding, place into freezer for 30 minutes. Take it out and then attempt to remove.

Once mold is used for making soap, it should not be used for food production. To avoid damage to mold, do not use sharp metal tools to cut or remove contents. Never place near an open flame, use under a broiler, or on a cook top burner.